High precision pressure plate dispenser Description:
1. Using PLC software to control the amount of glue, quantitative glue, the amount of glue can be adjusted.
2 Place the raw material bucket directly under the pressure plate to reduce the frequent glue down.
3. The pressure plate type automatic glue machine is suitable for 5 gallon or 20L/25L standard oil drums or plastic barrels. It can be equipped with a three-axis dispenser machine for precise operation of the assembly line with high automation.
4. When using, just control the switch of the lifting mechanism, press the pressure plate into the rubber barrel, open the air source switch, and mix the glue accurately and evenly with the metering pump, without drawing the wire, without big head phenomenon.
5. Double-cylinder structure design makes the machine operate smoothly and the action force is more uniform.
6. With the alarm function.
7. The pressure plate is smooth and durable, and the cone barrel is also suitable. After use, the inner wall of the barrel is clean and free of residue, economical and environmentally friendly, and the appearance is beautiful.
It is suitable for high consistency silica gel and grease adhesive/hot melt adhesive/two component polysulfide rubber. It has stable performance and easy operation. The operator is proficient with simple training. Can adapt to a variety of harsh conditions such as low temperature, high air humidity, and high intensity of use. The failure rate is low, the upper and lower strokes are all glued out, and mechanical failures rarely occur. nice appearance. After use, the inner wall of the oil drum is clean and free of residue, which is economical and environmentally friendly.
.png "High-precision plate dispensing machine")
High-precision plate dispensing machine